|
Back to Metal Mfg./Industry Equipment (Used) Index |
Exchange Index
INSTRUCTIONS:
- To respond directly to a specific listing, enter your email where specified and click on the "GO" button for that listing.
- To add a Buy / Sell / Trade listing to this category of the Exchange, choose Add: Exchange Listings.
Metal Mfg./Industry Equipment (Used)
|
|
MORE LISTINGS :
Wanted (1) |
Available (75)
|
WANTED & AVAILABLE
Listings:
(1 - 25) of 76
|
|
|
WANTED : LW907276
Shipping Pt. / Location: CANADA, GUELPH ONTARIO
|
|
| 10 |
each |
Ongoing |
| 2,ooo |
each |
USD |
Metal Stamping Equipment - pump press.
we want to buy stamping n pump press use equipments,if u get some pls let us know .thank
|
|
AVAILABLE : LA668890
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Used Metal Mfg./Industry Equipment - Granite Surface Plates.
USED GRANITE SURFACE PLATES, NOT GUARANTEED FOR ACCURACY
GRAY GRANITE 8’ X 12’ X 20” WITH 4” LEDGE X 6”, CHIPPED BOTTOM EDGE AND SOME CHIPS IN TOP EDGE $2500
TOP IN GOOD CONDITION
|
|
AVAILABLE : LA668915
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
| 1 |
unit |
once |
| 6500 |
each |
USD |
Metal Stamping Equipment - Amada Press Brake SPH30C (#3427).
AMADA HYDRAULIC PRESS BRAKE
33 TON MODEL SPH-30C NEW 1985
CAPACITY 33 TON
BED SIZE 25” X 16-3/4”
DISTANCE BETWEEN HOUSING 15.4”
THROAT DEPTH 20”
STROKE 4” ADJUSTABLE
OPEN HEIGHT 19.685”
SHEET SIZE FOR PUNCHING 39.37” X, 15.75” Y
TABLE HEIGHT 33”
WEIGHT 5500 LBS
OVERALL SIZE 87.8 H X 68.5 L X 57 W
EQUIPPED WITH
,
FOOT PEDAL AND PALM BUTTONS
SOLD AS IS CONTROL BROKEN
|
|
AVAILABLE : LA670693
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Melting Equipment - Covel Surface Grinder(#3277).
COVEL SURFACE GRINDER
6” X 12”
PERM MAG CHUCK 6” X 12”
MANUAL FEED
OPERATOR MANUAL
LARGE VOLUME OF USED WHEELS , ALL TYPES
30 DAY RETURN PRIVILEGE
|
|
AVAILABLE : LA690255
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - Rotodie #10 Brake Press(#3340).
16 ga x 10', rotary bending tool.
4 Position #37 Bottom Roto Die
7 degree cross breaking Groove
85 degree die opening 3/8" wide
85 degree dio opening 7/8" wide
85 degree die opening 1/2" wide
#1 top forming die
7-1/2 HP Motor
|
|
AVAILABLE : LA693888
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Used Metal Mfg./Industry Equipment - Knight Jig Borer (#73386).
Jig Borer
Manufacturer: KNIGHT
Model: 60
S/N:
Year:
Condition: EXCELLENT
34" x 18" Travel
Specifications:
Table 22" x 60"
Table Travel 34" x 18"
Maximum under spindle 24"
Spindle Speeds 40-2000 RPM (16)
Down Feed 5/16" , 7/16", 9/16", 1"
1-5/16", 1-3/4", 2-1/4", 3", 4
5-1/8", 6-3/4", 8-7/8",11-5/8
15-1/4
Equipped With:
Universal Quick Switch Tooling
Boring Heads, Drill and Shell Mill
Collets
Digital Read Out
AS IS WHERE IS, Maryland Plant
|
|
AVAILABLE : LA693891
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Used Metal Mfg./Industry Equipment - Brown & Sharp 618 Surface Grinder.
6" X 18”"WALKER ELECTROMAGNETIC CHUCK
COOLANT PUMP
HYDRAULIC X AND Y FEED
FOB OUR SHOWROOM
30 DAY RETURN PRIVILEGE
|
|
AVAILABLE : LA693894
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Metal Machining Equipment - Kearny Trecker Horz Mill(#73346).
Model 450TF-20
18" x 19" table
42" x 16" travel
Power draw bar,
Coolant
1967
|
|
AVAILABLE : LA720322
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - HTC Hydraulic Press (#3379).
Manufacturer: HTC
Model: 400MS
S/N: 4882797
Year: 1988
Condition: Very Good
400 Ton Straight Side Press
Specifications:
Capacity 400 Ton
Bed Size 48-1/2" x 125"
Ram Size 48" x 122-1/4"
Stroke 7"
Shut Height 16"
Open Height 23"
Motor (2) 75 HP 460/3
Weight 90,000 Lbs
Window Size 24" W x 23" H
Bed Height To Floor 42-1/2"
Foot Print 72" FB x 145" LR
Overall Size 159"LR x 110"FB x 165 ½"High
Equipped With:
Flush Floor Mount
Upper pins and links rebuilt in 2000
Running production just prior to removal
T-Slotted bed and ram
Power ram adjustment
Dual hydraulic counter balance of ram
Hi/Lo approach speed
Adjustable stroke length
Fostoria light curtains
300 PSI Thermal transfer oil cooler
Air storage tank
Lincoln automatic lubrication
Dual palm buttons on pedestals
Dual 75 HP Pump drives ( top mounted)
3/60/460 Volt electrics
FOB Truck, DE
|
|
AVAILABLE : LA720327
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Metal Machining Equipment - SMTW Centerless Grind (#3388).
Manufacturer: SMTW
Model: 1050A
S/N: 945
Year: 1995
Condition: EXCELLENT
50mm
Specifications:
Capacity 50mm
Infeed Diameter: 0.28 (Min.)/2.0 (Max.) Inches
Inches Limited by Work Rest
Infeed Max. Length: 4.8 Inches
Center Height from Work Table: 8.66 Inches
Maximum Work Load (Infeed): 10 Lbs
Thru Feed Diameter 0.2 (Min.)/2.0 (Max.) Inches
Limited by Work Rest
Grinding Wheel
Motor 14.75 HP
Wheel Size (DxWxB): 16 x 6 x 8 Inches
Wheel Speed: 1668 RPM
Surface Speed: 6855 SFM
Rapid Travel: 30 IPM
Spindle Taper 1:5 Taper
Dresser Unit: Variable Hydro Feed
Template Forming
Dress Swivel 1 Axis/± 3 Degrees
Spindle Bearing Cantilever Type/5 Shoe Hydrody
Regulating Wheel
Hand Wheel Rev: 0.016 Inches
Maximum Travel RP 0.07/0.13 Inches
Maximum Travel HW 4 Inches
Spindle Taper 1:5 Taper
Horsepower (DC): 2 HP
Wheel Speed (Variable): 20 - 200 RPM
Vertical Swivel 2 Degrees/+ 5 Degrees
Horizontal Swivel 1 Degrees/+3 Degrees
Wheel Size (DxWxB): 12 x 6 x 5 Inches
Dress Swivel: 2 Axis/1st -2 to +5/2nd -
3 to 3 +
Total KVA 30
Equipped With:
Coolant
Infeed & Throughfeed Capability
Hydraulic Swiveling Wheel Head and Regulation Wheel Dressers
Cycle Features: Thru Feed Grind, Plunge Grind, Work Ejection, Reg. Wheel Variable
Speed, Feed Start, Feed Retraction, Sparkout Delay, Hydraulic & Wheel Start - Stop
Static Type Wheel Balancing Stand and Arbor
Wedge Type Leveling Pads
Splash Guards
Assorted Wheel Hubs
Free Standing Control Panel
Wired for 3 Phase, 60 Cycle, 230 Volts Only
Made in China, Distributed by EcoTech Machinery
Overall Size Machine: 70" L-R x 65" F-B x 62" H
Electric Cabinet: 26" L-R x 22" F-B x 60" High
Estimated Total Weight: 6,500 Lbs.
Replacement Cost Today $41,000
FOB Truck, Our Baltimore Showroom
|
|
AVAILABLE : LA725558
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
CNC Metal Machining Equipment - Fuji 2 Spindle Turning (#3440).
Manufacturer: FUJI
Model: ANW-10T
S/N:
Year: 1994
Condition: Very Good
Right and Left 8:" Chucks with Auxiliary Loaders ,
Specifications:
Swing Over Carriage 15.4"
Acceptable Work Size 3" max- 4.72"L- 6.6 lb
Spindle Speeds 70-4000 RPM
Spindle (x2) 80mm dia.- 42mm bore
Spindle Motor (2) AC Servo 5.5/3.7 KW
Chuck (2x) 8"
Chuck Cylinder (2x) 4.7" dia x .98" stroke
Clamp Confirmation By stroke sensor
Slide Travel X 7.8"- Z 9.8"
Tool Blocks (x2) 8 Pos Turret
Carriage Travel Rapid X 630 IPM
Rapid Z 787 IPM
Tailstock NO
CNC Control Fanuc O-TTC
2 Axis Simultaneous
Robot Chuck 3 jaw chuck
Weight 6000 Lb
Foot Print w/o Stocker and Chip Conveyor 98.4" x 71"
Equipped With:
Right and Left Chucks
Auxiliary Loaders Right and Left
Built In Overhead Robot L291-S completes it's cycle of replacing work pieces on both spindles in just 22 seconds.
Work Stocker 24 pallets (3" Diameter work piece and up to 90" stacking hight)
New Monitor
Chip Conveyor
Enclosed Cabinet
|
|
AVAILABLE : LA733645
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - Mercury Mech Press Brake(#3449).
Manufacturer: MERCURY
Model: 8010
S/N: 3933
Year: 1975
Condition: Good
110 Ton x 144"
Specifications:
Tonnage 100 Tons
Bed 144" x 8"
Stroke 3"
Shut Height 15"
Equipped With:
ANGLE PLATES ON RAM
PALM BUTTONS
SELLER USED FOR STAMPING
|
|
AVAILABLE : LA750793
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Cutting Equipment - 3/8 x 8 Cincinnati Shear.
Manufacturer: CINCINNATI
Model: 2508
S/N: 16857
Year: 1943
Condition: Good
3/8" x 96" mechanical
Specifications:
Capacity 3/8" MS x 96"
Motor 15 HP 240/480/3
Cuts per minute 12 full length
35 at 24"
Back Gauge Range 30"
Gap in side frames 19"
Weight 20500 LBS
Floor Space 144" LR x 84" FB
Equipped With:
2 Sets Extra Blades
Rear Operated Manual Back Gauge (needs repair, back bar missing, holder damaged on right side)
One Shot Lubrication
72" Squaring Arm
FOB Truck, Our Baltimore Showroom
|
|
AVAILABLE : LA757769
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Melting Equipment - 75 ton Diacro Hyd Press Brake(#3500).
Diacro Hydra-Mechanical Press Brake
Manufacturer: DIACRO
Model: 75-8
S/N: 675047549
Year: 1975
Condition: Good
75 ton x 96" Hydra-Mechanical
Specifications:
Tons 75
Length of Bed 96"
Distance Between Housing 80"
Motor 10 HP
Back Gauge Range 22-1/2"
Stroke 3"
Fast Stroke Speed Rate 34 Per Min
Ram Adjustment 4"
Shut Height 12"
Throat Clearance 8"
Die Holder Height 5"
Floor Space 44" x 100"
Height 103"
Weight 9227 Lbs
Equipped With:
Original Degree Of Bend Programmable Back Gauge (not working)
Stroke Adjustment
Triad Light Curtain
|
|
AVAILABLE : LA757773
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Used Metal Mfg./Industry Equipment - Pines Rotary Hyd Tube Bender(#3508).
Pines Hydraulic Tube Bender
Manufacturer: PINES
Model: #1
S/N: 11035-83079
Year: 1983
Condition: Good
1" Pipe
Specifications:
Capacity I.P.S. Extra Heavy Pipe 1"
Non-Ferrous Tubing Y.P. to 12,000 PSI 1-3/4" O.D. x .188" Wall
Non-Ferrous Tubing Y.P. to 25,000 PSI 1-3/4" O.D. x .120" Wall
Steel Tubing Y.P. TO 40,000 PSI 1-3/4" O.D. x .072" Wall
Stainless Steel Tubing Y.P. TO 60,000 PSI 1-3/8" O.D. x .065" Wall
Maximum Tube Radius 10"
Maximum Tube Length Over Mandrel 9' 11"
Maximum Bend Angle 180 degrees
Standard Operating Pressure 1000 PSI
Steel Bar Round Y.P. to 40,000 PSI 7/8" Diameter
Steel Bar Square Y.P. to 40,000 PSI 3/4"
Angle Iron Y.P. to 40,000 PSI 1-1/2" x 1-1/2" x 3/16"
Square Tube (Mild Steel): 1-1/8" x .120" Wall
Rectangular Tubing (Mild Steel) E-Plane 1" x 1-1/2" x .120"
Rectangular Tubing (Mild Steel) H-Plane 1" x 1-1/2" x .083"
Floor Space 144" x 24"
Voltage 230/3/60
Equipped With:
Turret Stop Control Of Degree Of Bend
Push Button Pedistal Control
Hydraulic Mandrel Extractor
1.375 Tooling, 2" , 2.125, 2.362, 3", 3-1/2", 4-1/2", 5-1/2" Radius
Counter-Clockwise Rotation
30 day return privilege
|
|
AVAILABLE : LA787197
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
CNC Metal Machining Equipment - Okamoto HMC (#73661).
OKAMOTO CNC Horizontal Boring Mill
Manufacturer: OKAMOTO
Model: 3000
S/N:
Year: 1987
Condition: Very Good
120" X, 60" Y, 30"Z
Fanuc 11M CNC, 4th & 5th axis ready
Memory Size 320 M
Specifications:
Machine Travel 120" X
60" Y
30" Z
Spindle RPM 4500
Spindle Taper BT50
Automatic Tool Changer 40
Equipped With:
Drawbar tension = 5900lbs 11/27/03
31-1/2" Tsudakoma rotary table for sale at additional cost.
Riser blocks shown on table available at additional cost.
AS IS WHERE IS, Maryland Plant
|
|
AVAILABLE : LA787203
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - 7000 Ton HPM Hyd Press(#73577).
HPM 7000 Ton Hydraulic Press
Manufacturer: HPM
Model:
S/N:
Year: 1951
Condition: Very Good
7000 TON
Specifications:
Capacity 7000 TON
Pressure 2800 PSI
Bed 48" x 118"
Stroke 28" Max
Open Height 28"
Motor 200 HP 460/3
Height Above Floor 25'
Depth below floor 116"
Floor Space 146" x 126"
Equipped With:
2 Hydraulic Pumps
Hydraulic Tank 156" x 43" W x 72" High mounted on top
|
|
AVAILABLE : LA788983
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - 6500 Ton Loewy Hyd Press (#71964).
Manufacturer: LOEWY HYDROPRESS
Model: H
S/N:
Year: 1954
Condition: Very Good
6500 TON Used As A Rubber Pad Press,
The Open Height can be increased to 129" if the bottom upstroke cylinder
(used for the rubber pad forming process) is removed making it more suitable
for forging die conversion.
Specifications:
Tons 6500 (7166 Metric Ton)
Stroke of Ram 34" (864mm)
Distance top of Bolster to Face of Slide Ram UP 56-1/2" (1435mm)
Draw Depth 12" (305mm)
Lower Platen 58-3/4" x 36-5/8"
1492.25mm x 930.27mm
Upper Platen 59-1/4" x 37"
1504.95mm x 939.8mm
Working Pressure on Rubber Pad Max 10,000 PSI (690 bar)
Forming Area Max at 10,000 PSI 1269 Square Inch (8187 sq/cm)
Forming Area Max at 6000 PSI 36-7/8" x 58-7/8" x 16" thick
936.62mm x 1495.42mm
Overall Height of Press 46' aprox (14 Meter)
Height of Press Above Floor 32' (9.75 Meters)
Rapid Advance and Return 230"/min (584 cm/min
Pressing Speed 27-1/2"/min (70cm/min)
Stripping Speed 130"/min (330cm/min)
Hydraulic Working Pressure 2800 PSI (193 Bar)
Weight Total 1,000,000 Lbs. Aprox.
The press has been removed from the plant.
The contractor who removed the press can quote transportation and reassembly if needed.
Price includes loading on trucks.
Parts Available from Loewy
Additional Cost if Exporting:
Preparation for ocean freight and delivery to port $ 90,000 USD
|
|
AVAILABLE : LA788997
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
CNC Metal Machining Equipment - Cincinnati Turning Center(#3377).
Manufacturer: CINCINNATI
Model: Talon 210
S/N: 6810U1092022
Year: 1992
Condition: Good
Acramatic 850SX/ TC CRT CNC
Menu-driven programming in plain language.
Specifications:
Swing over Bed 20.86"
Swing Over Carriage 11.8"
Distance Between Centers 24"
Machinable Center Distance 23.6 Maximum
Spindle RPM with 8" chuck 45-4500
Spindle RPM with 10" chuck 45-4000
Spindle Hole 2.44"
Bar Capacity 2"
Turret Stations 12
Spindle Motor 20 HP
Spindle Nose A2-6
Tailstock Quill Diameter 2.953"
Tailstock Quill Extension 3.937
Tailstock Position 21.6" Maximum
Tailstock Thrust 1320 lbs
Feed Range - Infinitely Variable .1 to 200 IPM
Rapid Traverse 600 IPM
Cross Travel - X-Axis 6.8"
Longitudinal Travel - Z-Axis 23.6"
Dimensions 127" L x 86" W x 73" H
Weight 10600 lb
Equipped With:
10" Hydraulic Chuck
Programmable Tailstock
Tool Setting Probe
Extra Motor
Chip Pan and Coolant
Extended Program Storage 1130 ft., Total MCL Space 66K
RS 232 Port
FOB Detroit MI
|
|
AVAILABLE : LA788999
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Metal Machining Equipment - NORTON Cylindrical Grinder(#3386).
Manufacturer: NORTON
Model: 10x21 Uni
S/N: P2561
Year: 1966
Condition: Good
10" x 21"
Specifications:
Swing 10"
Distance Between Centers 21"
Wheel Size 10" x 3/4"
Work Head Swivel 360 degree
Table Swivel Adjustment 3" per foot
Hydraulic Table Speed Variable 3-144 IPM
Dimension 80" x 56" x 65" High
Equipped With:
Hydraulic
Incremental Wheel Head Infeed
Swing Down Internal Attachment
Coolant System
30 DAY RETURN PRIVILEGE
FOB Truck, Our Baltimore Showroom
|
|
AVAILABLE : LA802878
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Used Welding Equipment - 12' Hobart Seam Welder(#.
12' travel, Air Clamp, 600 Amp mig welder.
|
|
AVAILABLE : LA820524
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
CNC Metal Machining Equipment - Okuma Howa Twin Spindle CNC Lathe.
(2) 10" 3 Jaw Chucks, FANUC 18T CNC Control, (2) 12 Position Turrets,9.1" Max Turn diameter, toolholders, 1994
|
|
AVAILABLE : LA820527
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Stamping Equipment - 30 Ton Whitney Hyd Punch (#3661).
Manufacturer: WHITNEY
Model: 635A
S/N: 635 C85-2534
Year:
Condition: Good
30 Ton
Specifications:
Tons 30
Capacity .03" to 5"
Hole Size 5" thru 10 GA
1" thru 3/8"
Throat 36"
Sheet Size 30" x 50"
Gauging Sheet Size 30" x 72"
Throat 30"
Stroke 1/4" x 2"
Shut Height 8.5"
Nibbling Strokes Per Minute 90
Floor Space 150" x 88"
Weight 10,000 LB
Motor 10 HP 230/460V 3Ph
Equipped With:
Rapid Change Tool System.
Gauge Bar.
Jog/Punch/Nibbling Cycle Switch
Large Assortment of Tooling.
|
|
AVAILABLE : LA820537
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Other Used Metal Mfg./Industry Equipment - TOREX Vibratory Debuur (#3662).
TOREX 36" Vibratory Deburring Tub
Manufacturer: TOREX
Model: TG 3614F
S/N: 3614
Year:
Condition: Good
36" Tub
Specifications:
Tub Size 36" Diameter x 14" Deep
Motor 2 HP 115/230V 1Ph
Equipped With:
Neopreme Tub
Sound Cover
No coolant pump
FOB Truck, Our Baltimore Showroom
|
|
AVAILABLE : LA820538
Shipping Pt. / Location: USA, BALTIMORE MARYLAND
|
|
Metal Cutting Equipment - TWT Double Miter Cold Saw(#3659).
TWT 3" Precision Double Miter Non-Ferrous Saw
Manufacturer: TWT PRECISION
Model:
S/N: 4208934
Year:
Condition: Good
3" Non-Ferrous
Specifications:
Capacity 3" Aluminum
Saw Blades 12"
Feed Foot Control
Motor 1 HP 115/230/1 both heads
Equipped With:
Air Chip Removal
FOB Truck, Our Baltimore Showroom
|
Additional Pages of WANTED & AVAILABLE Listings: 1 2 3 4
|
|
