INSTRUCTIONS
To inquire about a specific listing item, simply:
  1. check the box for any listing(s)
  2. click on the CONTACT US button located at the bottom of the page.
  3. and complete the business card reply form

Tire Industry Equipment (Used)
Trade Listings Main Menu AVAILABLE LISTINGS: (1 - 24) of 24

AVAILABLE : LA667202
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : ECON Guillotine Shear: M0103. The guillotine scrap shear is designed for rugged scrap processing. This unit will shear white goods (7-11 tons/hour), mixed scrap (65 tons/day), railroad ties (100 tons/day), tires (14-24 per minute double stacked) and much more. It is powered by a 125 h.p. 3 phase electric motor, running hydraulics through two 10” diameter cylinders capable of 200 tons of shearing force. This unit comes with both radial infeed and outfeed conveyors. This is a very nice shear that was previously used to cut tires and wheels for a waste incineration plant to burn
Quantity Units Frequency
1 unit once
Price Per Unit Funds
55000.00 each USD

AVAILABLE : LA781813
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Multitek TDH 1424 Tire Rim Crusher: T02190. This de-rimmer mounts to a hydraulic truck loader or excavator to separate the tire and the wheel. It has the potential to crush 60 wheels per hour. This unit was used for demonstration in a Multitek dealer showroom and then purchased by a county and never used by them. This unit has also been kept inside and is ready to run
Quantity Units Frequency
1 each once
Price Per Unit Funds
13500 each U S dollar

AVAILABLE : LA823597
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Portable SSI M85 with 2” Trommel Screen Classifier: T01113. This is a very clean portable SSI shredder that will produce 5 tons per hour of primary shred. It is powered by a 325 hp Cummins M-11 diesel engine, and is hydraulically driven. The cutting chamber is 35” x 52”, and the hopper opening is 59” x 67”. It is mounted on a dual axle trailer, and has a 2” trommel screen classifier for chip processing. The shredder can be easily transported, so it would be ideal for tire pile cleanups. This is a clean machine that can be viewed in operation. Pictures are available upon request.
Quantity Units Frequency
1 each once
Price Per Unit Funds
147500 each US Dollar

AVAILABLE : LA823604
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 2005 Columbus McKinnon Chipper Tire Shredder: T0181. This is just like a new CM chip shredder that has a multi stack cutting chamber. In fact we will be installing new hardened rotors in this machine as part of the refurbishing that were going to be doing to this machine. This is a much better longer life rotor arrangement than came out in these machines when they were shipped new from the factory. In addition these will have the multi-stack cutters meaning that they will have 1.9, 1.8, as well as 1.7 knife seats available to put knives on. This way you can purchase someones used 2.0 knives and grind it down three more times using it first on the 1.9 then on the 1.8 rotor seats and finally on the 1.7 rotor seats. This way your knife life is extended by three times and if you’re able to purchase used 2.0 knives your cost savings will be tremendous. Note: In addition to this Chipper we also have one that has the 2.2, 2.1, and 2.0 rotor seats. So you could actually purchase a new 2.2 knife and grind and re-use it five more times so this would be getting you six total uses out of each knife. And when they cost around $20.00 each this adds up to be a tremendous cost saving over a year’s time and especially over the life of the shredder. Of course this is if you would purchase both of these chippers that we have available refurbished for sale. This machine will be powered by a 200 H.P. electric direct drive system and have a soft start in order to reduce the amperage draw on startup. This machine was purchased new in July of 2005 and when refurbished by our shop will be just like new with the exception that the rotors will be made of heat treated 4140 material rather than the normal mild steel that they were shipped from the factory with. This means that if a knife does come off while the machine is in operation and you don’t catch it immediately you shouldn’t harm your knife seats near as easily. This chipper would work ideally in conjunction with any other primary shredder that you currently have installed. Of course you will need some kind of classifier (sizing screen) and re-circulating conveyors in order to make a sized chip. This shredder will have in-feed hopper, stand, and out-feed hopper.
Quantity Units Frequency
1 each once
Price Per Unit Funds
235000 each US Dollar

AVAILABLE : LA823605
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 2005 Columbus McKinnon Chipper Tire Shredder: T0180. This is just like a new CM chip shredder that has a multi stack cutting chamber. In fact we will be installing new hardened rotors in this machine as part of the refurbishing that were going to be doing to this machine. This is a much better longer life rotor arrangement than came out in these machines when they were shipped new from the factory. In addition these will have the multi-stack cutters meaning that they will have 2.2, 2.1, as well as 2.0 knife seats available to put knives on. This way you can purchase a brand new 2.2 knife and grind it down two more times using it first on the 2.1 then on the 2.0 rotor seats. This way your knife life is extended by three times. Note: In addition to this Chipper we also have one that has the 1.9, 1.8, and 1.7 rotor seats thus giving you three more knife grindings. So you could actually purchase a new 2.2 knife and grind and re-use it five more times so this would be getting you six total uses out of each knife. And when they cost around $20.00 each this adds up to be a tremendous cost saving over a year’s time and especially over the life of the shredder. Of course this is if you would purchase both of these refurbished chipper shredders that we currently have for sale. This machine will be powered by a 200 H.P. electric direct drive system and have a soft start in order to reduce the amperage draw on startup. This machine was purchased new in July of 2005 and when refurbished by our shop will be just like new with the exception that the rotors will be made of heat treated 4140 material rather than the normal mild steel that they were shipped from the factory with. This means that if a knife does come off while the machine is in operation and you don’t catch it immediately you shouldn’t harm your knife seats near as easily. This chipper would work ideally in conjunction with any other primary shredder that you currently have installed. Of course you will need some kind of classifier (sizing screen) and re-circulating conveyors in order to make a sized chip. This shredder will have in-feed hopper, stand, and out-feed hopper.
Quantity Units Frequency
1 each once
Price Per Unit Funds
235000 each US Dollar

AVAILABLE : LA843178
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 1800 E SSI Tire Shredder System: T0189a. A very nice clean 1992 machine that has recently had a lot of refurbishing done to the whole machine and only operated a small amount since this work was performed. The machine has only shred around 25,000 passenger tires since it was refurbished and is ready to shred many more without anything needing done at present. This machine recently had both main shafts replaced, all new bearings and seals installed, and a new 125 H.P. electric motor installed and the input section of Reggiani gear box replaced (this is the part that generally fails on this type of heavy duty gear drive reducer). This shredder currently has two hook 1 3/4” wide knives installed and has a fairly large shredding chamber with the size being 36” wide X 72” long. The shredder has a tremendous amount of torque for a small shredder with it developing 44,384 on the fast shaft and 56,064 on the slow shaft. That makes this particular shredder ideally suited for the shredding of passenger tires, light truck tires, e-waste, light metals, plastic, fiberglass, aluminum castings, wood waste, MSW, steel or plastic drums and many other products. Machine comes with In-feed hopper, shredder, shredder stand, and electrical control panel and will have a new paint job before it leaves our shop. This is the price for this system set up as a 2” nominal TDF chip system - we will furnish you with a 12 shaft “refurbished” daisy wheel classifier and all the recirculating conveyors necessary to complete system. Please contact us for a price for the shredder alone.
Quantity Units Frequency
1 each once
Price Per Unit Funds
130000 each US Dollar

AVAILABLE : LA843181
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Model MS-5028 Jordan Reduction Solutions Tire Shredder: T0191. This 1992 machine has just been recently completely refurbished here in our shop and is ready to be put to work. This machine has all new bearings and seals and just had both main gears replaced and had new sides fabricated for the shredder box. This shredder is powered by (2) 75 H.P. electric motors and comes complete with a new in-feed conveyor and a new out-feed conveyor. This shredder currently has two hook 1 3/4” thick knives all the way down to 1” thick knives installed. The machine shredding chamber has a size of 28” wide X 50” long. The shredder has a tremendous amount of torque for a small shredder and it would work well for the shredding of many tuff application items. That makes this particular shredder ideally suited for the shredding of passenger tires, light truck tires, e-waste, light metals, plastics, fiberglass, aluminum castings, wood waste, carpet, MSW, steel or plastic drums and many other products. Machine comes with in-feed conveyor, in-feed hopper, Model MS-5028 shredder, shredder stand, out-feed conveyor, and electrical control panel and will have a new paint job before it leaves our shop. Note: As a mobile machine this shredder would be mounted on a 48’ single drop tandem (spread) axle trailer and be powered by a 3406 Caterpillar 225 KW Generator set. We currently have these above items in inventory and could have this mounted and ready to be sent out mobile in 3-4 weeks. The price for this as a mobile unit is $125,000. Buy with confidence that this machine should operate for many years without causing major problems because of all the work that has been done to the machine recently.
Quantity Units Frequency
1 each once
Price Per Unit Funds
90000 each US Dollar

AVAILABLE : LA857199
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : SSI Prim Max 560 Tire Shredder- T-02202. This is a 120HP SSI PR 560 shredder. It only has 2700 hours on it. It comes with 4” knives, remote control, anti-bridging inserts, extended feed hopper, and extra parts. It will do about 5 tons of car tires an hour and about 2 tons of truck tires per hour. This shredder also works well for appliances, construction and demolition waste, wood, tree stumps, and MSW. This is a low noise and easy to maintain low-speed, high torque shredder. This great multi-material shredder is ready to be demonstrated
Quantity Units Frequency
1 each once
Price Per Unit Funds
85000.00 each US Dollars

AVAILABLE : LA862601
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Eagle Tire Baler: T02217. The Eagle line of tire processing equipment is highly regarded in the industry. This 2002 model baler is in good condition and is ready to go to work.. It is on a trailer for easy transport, and is powered by a three cylinder Isuzu engine. A completed bale is 2 ½ foot by 4 ½ foot by 5 foot and contains 100 waste car/light truck tires. This machine can be used not only for tires but also cardboard, plastics, white goods, and many other materials.
Quantity Units Frequency
1 each once
Price Per Unit Funds
55000.00 each US Dollars

AVAILABLE : LA867659
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 2001 Hogzilla 1564 Tire Shredder/Grinder, T-02208. Hogzilla makes a very heavy duty, high production machine, and this machine is no exception. It is a Model 1564 with a brand new Tire Grinding option that has just been installed, and it can process 12-15 ton per hour of 2” rubber chips. The Hogzilla is powered by a 1000 hp Cat engine that had a major rebuild done on it in 2006. There is a magnetic head pulley on the discharge conveyor to recover the steel from the tires. This machine has been mostly used to shred tires, but it has the conversion kit to make it into a very high production wood grinder as well.
Quantity Units Frequency
1 each once
Price Per Unit Funds
365000 each US Dollars

AVAILABLE : LA880062
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Barclay 6P Tire Shredder T-02224. Barclay is the name people seek out when looking for a tire preshredder. This Barclay 6P Tire Shredder comes with the wide infeed conveyor for even feeding of the tires into the cutting chamber. The Barclay 6P Tire Shredder will do truck tires or car tires down to a material that is suitable to be put into most landfills. Or you can use it in front of a primary shredder, tremendously extending the life of the knives in that shredder. In addition to wear on your knives, it also allows a much greater throughput rate. The Barclay 6P Tire Shredder is a great stand alone shredder for volume reduction or a great addition to a current tire shredding operation.
Quantity Units Frequency
1 each once
Price Per Unit Funds
105000.00 each US Dollar

AVAILABLE : LA880063
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 1998 Eagle Tuf Cut Tire Cutter T-02170. The Eagle Tuf Cut Tire Cutter is a great way to process tires without the high cost of a shredder. This 1998 Eagle Tuf Cut Tire Cutter has been used very little, the 4 sided blade is only on its second side, so there is a lot of life left on it. This portable Eagle Tuf Cut is powered by a 23 hp Isuzu Diesel engine, and it is capable of cutting a tire up to 23.5/25 12 ply. The Eagle Tuf Cut tire cutter can also take 2 or 3 car tires at a time, yielding 60-70 truck tires per hour or 120-150 car tires per hour. The Eagle Tuf Cut also comes standard with a tire lift and rollers to handle those larger tires.
Quantity Units Frequency
1 each once
Price Per Unit Funds
32500.00 each US Dollar

AVAILABLE : LA880064
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : MacSaturn 60x44HT Tire Shredder T-02223. MacSaturn is highly regarded in the tire shredding industry, and the MacSaturn 60x44HT Tire Shredder is the workhorse of their line. The machine is powered by a 300 hp hydraulic power pak, so it does a great job on truck tires. This MacSaturn 60x44HT Tire Shredder is just 3 years old, and has excellent maintenance. It comes with several extra blades that are hard faced and ready to be put in the machine.
Quantity Units Frequency
1 each once
Price Per Unit Funds
250000.00 each US Dollar

AVAILABLE : LA898036
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : SSI Q55 Quad Shaft Shredder- T-02198. SSI makes a very high quality shredder, and this machine has very low hours. The Q55 is a quad shaft shredder with a 50 hp electric motor. It also has a hydraulically operated ram feed hopper for those hard to grab items like buckets and plastic bottles. The cutting chamber is 36” x 40” so the shredder is great for light gauge metals, some electronic scrap, textiles, paper and many other materials. A very clean shredder that’s ready to go to work.
Quantity Units Frequency
1 each once
Price Per Unit Funds
82500 each US Dollars

AVAILABLE : LA898038
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : TSI TC-50 Tire Cutter- T-02209. Tire Service Equipment is the leader in all types of tire shop equipment. This Tire Cutter is almost brand new, it has only had about 400 tires run through it. It is hydraulically powered and runs on a gas engine. This model is designed for affordability and low maintenance. The patented double shear system is easily adjustable to maintain a zero clearance for clean shearing. This system eliminates blade separation and extends the life of the shear bars.
Quantity Units Frequency
1 each once
Price Per Unit Funds
6500 each US Dollars

AVAILABLE : LA898041
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Rotex Screen- T-02218. Rotex has been in the screening innovation business for over 150 years, they are the premier equipment for separating dry materials down to particle size. This unit is a 4 deck model 804 screen with a ball deck. It includes several aluminum frame screen decks ranging from 4m to 80m. In addition it is cable suspended with it’s own frame for isolating out-of-balance screening forces from the surrounding structure. This is a very clean unit and is ready to go to work.
Quantity Units Frequency
1 each once
Price Per Unit Funds
40000 each US Dollars

AVAILABLE : LA898058
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Excel Portable Tire Shredder- T-0242. This portable tire shredder is in excellent condition. It is powered by a 425 hp CAT 3206 Diesel Engine. The machine has been completely rebuilt with new shafts, bearings, and rebuilt blades installed. The gearbox was rebuilt in the summer of 2007. It is mounted on a steel frame 40’ semi trailer that is 5th wheel towable. It comes with a side infeed conveyor, and a back discharge conveyor. This machine can shred 800 Passenger tires per hour, and 120 Truck tires per hour. The shredder gives you a rough, primary shred.
Quantity Units Frequency
1 each once
Price Per Unit Funds
150000 each US Dollars

AVAILABLE : LA917236
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Cracker mill, 32” Double Roll - T01103. This is one of the cleanest cracker mills that you will ever find. We can’t find the brand name of this machine anywhere on the machine. It is currently mounted on a heavy duty steel frame so that it can be easily moved from one spot to another unlike most of these machines which are very time consuming to move from one spot to another. This machine is powered by a new 300 H.P. 1750 rpm electric motor and is coupled to a very heavy duty gear box that has a ratio of 29 to 1. So the main shaft in the mill is running at 60 rpm and then it is driving the other shaft at 141 rpm so it has a 2.36 to 1 ratio. The rolls on this mill look like brand new and are 32” wide and have a diameter of around 24”. This machine came out of a shop where it was still being operated and it looks ready to be powered back up in your shop with minimal amount of work because of the way the machine is mounted on the steel frames. This machine comes with a new soft start and a reconditioned control panel. This machine would work ideally for taking ¾” size tire chips down to ¼” mulch at around 4,000-5,000 lbs per hour, or it would also produce a 10 mesh product at around 2,000-2,500 lbs per hour. Of course you would need some screw augers and a Rotex screen, magnets, and some aspiration equipment to put with this mill in order to achieve these results and of course these would be at additional costs.
Quantity Units Frequency
one each once
Price Per Unit Funds
95000 each U S Dollar

AVAILABLE : LA918044
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : MacSaturn 62x40HT Tire Shredder / 2” chip system: T02195. The MacSaturn 62x40HT is very highly regarded in the tire shredding industry, and this system is in good condition and ready to go to work. It is powered by two (2) 100 hp electric motors that drive a single KYB hydraulic motor. This system comes with a Bulk Handling System 2” rotary disc classifier, and all re-circulating conveyors to make a complete 2” chip system. This machine can shred about 400 car tires or 80 truck tires an hour down to a 2” chip. A very nice system a great price.
Quantity Units Frequency
one each once
Price Per Unit Funds
175000 each US Dollar

AVAILABLE : LA918045
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : 1998 Triple S Segmentizer Tire Shredder: T02215. Triple S has been making high quality processing equipment for many years, and the Segmentizer is a robust machine that does a great job of preshredding tires. This process of preshredding tires takes the load off the knives of the primary shredder, as well as increasing the volume capbilities. A set of rebuilt knives was just installed. This 50 hp electric direct drive machine is mounted on a trailer, and is ready to go to work. The shredder is top feed and can be viewed in operation by appointment. The conveyors are available at additional cost.
Quantity Units Frequency
one each once
Price Per Unit Funds
96000 each US Dollar

AVAILABLE : LA918046
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : MacSaturn 62x40HT 2” Tire Shredder/chip system: T-02197. The MacSaturn 62x40HT is the machine to use for mobile tire cleanups. It will shred 400 car or 80 truck tires an hour down to a 2” chip. This unit is hydraulic and is powered by a 360 hp Cummins diesel engine, and comes mounted on a triple axle trailer for easy moving from site to site. The shredder comes with an extra set of blades, and the shafts and the hydraulic motor were replaced in the spring of 2007. This system comes with a Bulk Handling System 1 ¾” rotary disc classifier, and all re-circulating conveyors to make a complete 2” minus chip system. This Saturn 62x40HT is a clean machine that has been well maintained and is ready to go to work for you.
Quantity Units Frequency
one each once
Price Per Unit Funds
315000 each US Dollar

AVAILABLE : LA918048
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Cumberland 50H Granulator: T01114. Cumberland has been building high quality equipment for over 50 years, and is widely recognized as a design and engineering leader in the size reduction industry. The Cumberland 50H granulator has a 15 blade helical rotor, with 2 bed knives. This granulator is 200 hp and the throat opening is 20 inches by 50 inches. The 50H will process rubber, plastics, purgings, and many other materials at a rate of 2500 to 3000 pounds an hour. This Cumberland has only been used on film so the inside is in very good condition, there is no sign of wear at all. This machine is ready to go to work.
Quantity Units Frequency
one each once
Price Per Unit Funds
75000 each US Dollar

AVAILABLE : LA918174
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Eagle Truck Tire Debeader: T-02234. Eagle makes great tire processing equipment, and this Truck Tire Debeader is a great addition to any operation. Removal of the bead wire prior to the shredder allows for a cleaner end product and reduces the wear on the knives, saving on costly maintenance. This portable debeader just had a new pump put on it so it is ready to go to work.
Quantity Units Frequency
one each once
Price Per Unit Funds
50000 each US Dollars

AVAILABLE : LA918175
Shipping Pt.: USA, CAIRO MISSOURI
Other Tire Industry Equipment : Eagle Super Slicer- T-02233. Eagle is the company to look to for tire processing equipment. The Eagle Super Slicer enables you to remove the sidewalls and the steel beads from truck tires, light truck tires and car tires. The cycle time is about twelve seconds for a truck tire up to 44 inches for a production rate of 50-60 tires per hour, and eight seconds on car tires for a production rate of 70-90 per hour. This Super Slicer is diesel powered but can be hooked up to electricity. This machine is ready to go to work..
Quantity Units Frequency
one each once
Price Per Unit Funds
23000 each US Dollars

All prices are subject to change. Confirm all prices.
Check off the Items you are interested in contacting us about,
then click on the CONTACT button above.

Tel. 660 295-4204
Tel. 800 423-9062
Fax. 660 295-4871
Email. General Inquiries
Unlimited Resources Corporation
1088 County Road 1745
Cairo · Missouri
USA · 65239
Online Software by Scrap.Net, Inc


File Reference: