Location: USA, SAN DIEGO CALIFORNIA

Reznor Infrared Heater with Chain Mount & Thermostat.
Reznor Infrared Heater with Chain Mount & Thermostat Model #RIHVN100-S2 Designed to provide personal comfort heating with reduced energy cost Infrared heaters can best be compared to the sun in how they heat. On a bright sunny day, you can feel the infrared rays of the sun heating your skin surface. The same infrared rays are also heating the concrete sidewalks and buildings. Infrared heating equipment works the same way - it warms people, heats floors, walls, machinery and other surfaces, without heating the air between. The ''infrared heated'' objects in turn warm the surrounding air. Eliminated are the costly ceiling heat losses and discomforts of cold air stratification that are so familiar with conventional forced air heating systems. Infrared heat assures floor level comfort with fuel savings up to 50%. Electrical energy is also saved because there is no need for a fan or blower. In addition to the gas and electric energy savings, infrared heaters have other economical installation and operational features. Model RIH, RIHV heaters can be suspended by chains (included) from a joist or mounted to a wall, making them well suited for space or spot heating. Direct venting is not required. Operational service and maintenance requirements are minimal due to the absence of moving parts. Model RIH, RIHV high intensity infrared units are approved for use in The United States and Canada by the Canadian Standards Association (CSA) Note: *Not approved for residential use* Standard features: • 115 volt operation • Direct spark ignition, 100% safety shut-off • Solenoid gas valve, 1/2'' NPT inlet • Ceramic combustion surface temperature up to 1850°F, capable of reaching full intensity temperature in less than 30 seconds • Seamless aluminized steel plenum chamber with stainless steel ceramic tile retainer clips • Venturi mixer of spun metal construction for precision metering of air/gas mixture • Highly polished aluminum reflector • Balanced suspension holes, 3/8'' diameter • 120/24V Thermostat (50° - 90°F) • Chain (50 ft.) with 14 ''S'' hooks Ventilation requirements Natural Gas - 4 CFM of positive air displacement per 1,000 BTUH Warning: Gas-fired appliances are not designed for use in hazardous atmospheres containing flammable vapors or combustible dust, or atmospheres containing chlorinated or halogenated hydrocarbons. Installations in public garages or airplane hangars are permitted when in accordance with ANSI Z-223 and ANSI/NFPA 409 and NFPA 888 codes or CNAI-B149 codes and enforcing authorities This is a Brand New ''Open Box'' Item that has never been used or taken out of the box