Location: USA, OHIO

400 TON HFA FEINTOOL PRESS.
ONE USED 400 TON HFA FEINTOOL PRESS COMPLETE REBUILT OF THE HYDAULIC SYSTEM AND NEW CONTROLS IN 1997 AGE - 1975 TECHNICAL DATA MODEL – HFA – 240 / 400 – 800 / 800 OIL – HYDRAULIC FINE BLANKING PRESS TOTAL CONNECTION VALUE – 70kw MAIN DRIVE – 55kw CAPACITIES: TOTAL CAPACITY – min / max – 1- 400 MP VEE – RING CAPACITY-min/max - - 180 MP STRIPPING CAPACITY – MAX – 50 MP COUNTER PRESSURE CAPACITY – min / max – 5 – 80MP EJECTION CAPACITY – MAX – 22.5 MP PRESSURE: RAM PRESSURE – MAX – 80mm VEE – RING STROKE ( INCL. RESERVE ) – MAX – 20MM COUNTER PRESSURE STROKE – MAX – 30MM UPPER TABLE STROKE – MAX – 2MM STROKE RATE – UP TO 40 / MIN TOTAL CAPACITY – 360 MP MATERIAL THICKNESS – 4.5 MM RAM STROKE – 46 MM / STROKE RATE – 25 – 26 S / MIN LENGTH OF FEED – 100MM WORK PIECE REMOVING – BLOWING DIE AREA : TOOL CLAMPING AREA TOP – 800 X 800 MM TOOL CLAMPING AREA BOTTOM – 800 X 800 MM INSERT RING TOP ( EXCL. PLATE 15MM ) – 400 X 60 MM TOOLSHUT HEIGHT – MAX – 335 MM INSERT RING BOTTOM ( EXCL PLATE 20MM ) 350 X 56 MM TOOL SHUT HEIGHT MIN – 225 MM CLAMP AREA DISTANCE – MAX – 415MM MATERIAL DISTANCE FROM TDC – MIN - 100 MM MATERIAL DISTANCE FROM TDC – MAX – 200 MM PRECISION ADJUSTMENT INDICATOR, READING ACCURACY – 0.01 MM SPEEDS ; SHEAR SPEED – 3 – 25 MM / S CLOSING SPEED – MAX – 120MM / S RETURN SPEED – MAX – 135MM / S ROLLER FEED ; THRUST PER FEED – APPROX – 180 KP ROLLER HOLD – DOWN CAPACITY AT 5 BAR APPROX – 680 KP FEED PITCH – MAX – 450 MM MATERIAL WIDTH – MAX – 350 MM MATERIAL THICKNESS – MAX – 14 MM ROLLER OPENING WIDTH – MAX – 25 MM HEIGHT ADJUSTMENT – MAX – 100 MM SCRAP CHOPPER ; SHEAR CAPACITY ( ROOF – TYPE SHEARING – 5 ) 36 MP STRIP LUBRICATING DEVICE : LUBRICATING ROLLERS FOR MATERIAL WIDTH – MAX – 350 MM HYDRAULIC UNIT ; COOLING WATER QUANTITY – APPROX – 1800 OIL CONTAINER CONTENTS – APPROX – 900 COMPRESSED AIR PRESSURE – MIN – 6 BAR COMPRESSED AIR CONSUMPTION – APP- - 40 NM3 / H EQUIPPED WITH: FRONT AND REAR COVERS STOCK LUBE SYSTEM PART AND SCRAP SEPARARETOR